Expert Advice On Water Heater Maintenance

Expert Advice On Water Heater Maintenance

Water heaters are usually ignored up until they fail to provide enough hot water. To prevent the problem from escalating, let a specialist inspect your tank and look for early signs of damage. Avoid spending too much on repairs by maintain your water heater regularly. Doing this also helps prolong the lifespan of the heating system. It is wise to hire a specialist if you find it difficult to work with your unit on your own.

It is important to take safety measure before maintaining your unit. Protect yourself from unexpected electric shocks and fatal accidents by shutting down the heating source of your unit. To avoid splashing water on the electrical conduits, wipe water puddles as soon as you notice them around the base of the tank. If your pipes are leaking, it helps turning off the water-supply valve to solve the problem temporarily. Take note that water heaters can be dangerous appliances if not maintained regularly. Keep your family away from harm by taking immediate action right before the unit breaks down completely.

Glass lined water heaters are designed to fight against rust and corrosion. However, the tank can eventually expand and crack due to varying temperatures inside. Rust can attack the internal components if the water starts to seep into its lining. You may find it difficult to repair this problem since rust and sediments can cause holes to appear at the bottom of the tank. Calcium carbonate forms inside the tank every time water is heated. If you let the minerals and sediments sit inside the tank for a long time, it can affect its heating efficiency and can cause the heating element to stop working. Do not let your water contaminate by flushing and draining your water heater from time to time.

You can start by draining and flushing your tank to get rid of the sediments. Experts recommend repeating this step every six months to prevent rust and corrosion from developing. To drain, attach a standard hose to the drain valve at the bottom of the tank. Shut off the cold water valve and release pressure by opening the T&P valve. Open the drain valve until the tank is empty. Flush the remaining sediments by removing the hose and placing a bucket under the drain valve. Open the cold water valve and wait until the water runs clear. Make sure to open a hot water tap inside your house prior to refilling the tank. Do not turn on the heating source until the tank is full.

Check the anode rod of your water heater to see how much it has deteriorated. This rod is designed to attract charged water molecules inside the tank, protecting it from rust and corrosion development. An anode rod can last up to 5 to 10 years if not maintained annually. Replace the rod as soon as you see metal wiring around it. An anode rod is useless if it measures less than of an inch. To change the anode rod, close the water-supply valve and unscrew the nut that suspends it. Install the replacement rod and tighten the screw to secure it into place. You can now open the cold water-supply valve once you are finished replacing it.

Check the heating element of your water heater if it’s starting to operate inefficiently. Heating elements are usually located at the side of the tank. Calcium carbonate can coat the lower heating element without regular maintenance. To replace it, start by testing the electricity and make sure it is turned off. Shut down the cold water valve and open the relief valve before draining. Once the tank is empty, remove the electrical and ground wires in the heating element. Simply unscrew the old element and replace it with a new one. Reverse the steps listed above for a successful heating element replacement. Refill your water heater tank before switching the power on.

You may need to adjust the thermostat settings of your water heater down to 120F to prevent your tank from overheating. No need to change the settings from time to time once your water heater has a stable temperature. Doing this saves a lot of energy and protects your family from scalding their skin. Having a water temperature as high as 135F can scald the skin in a matter of 5 seconds. Stop your water tank from popping and cracking by changing your thermostat settings. If the problem continues, ask help from a specialist immediately.

These are some of the basic points on how to maintain your water heater properly. However, if you encounter problems along the way, do not hesitate to ask help from a professional. Water heater specialists have the right tools and knowledge on how to fix your water heater issues immediately. It’s better to start maintaining your heating system before it’s too late.

Looking to find out more about water heater replacement , then visit to find the best water heater specialists for your needs.

Videos Related to » Expert Advice On Water Heater Maintenance:

chat with the experts podcast home heating - On this segment of Chat with the Experts Kiel Hauck talks with Chris Cunningham of Service ...